加工純鋁時，容易粘刀的幾點分析是怎樣的呢？下面鋁板生產廠家為您講解一番。
When processing pure aluminum, what is the analysis of the easy sticking of the knife? Next, the aluminum plate manufacturer will explain it to you.
1、鋁材料質地偏軟高溫容易粘刀；
1. The aluminum material is soft and easy to stick the knife at high temperature;
2、鋁不耐高溫，容易開紋；
2. Aluminum is not resistant to high temperature and easy to crack;
3、跟加工切削液有關：油性潤滑性能好；水溶性冷卻性能好；干切削費用高；
3. It is related to the cutting fluid: good oil lubrication performance; Good water soluble cooling performance; High cost of dry cutting;
4、加工純鋁時，應選用鋁加工專用的立銑刀：正前角，刃口鋒利，大排屑槽，45度或55度的螺旋角；
4. When processing pure aluminum, the end milling cutter specially used for aluminum processing shall be selected: positive front angle, sharp edge, large chip discharge groove, 45 ° or 55 ° spiral angle;

5、被加工件和數控刀具的材料具有較大的親和力。
5. The materials of machined parts and NC tools have a greater affinity.
6、前刀面粗糙刀具加工軟的材料。建議：機床條件差到好要求低到高，請分別使用高速鋼，涂層拋光硬質合金、PCD聚晶金剛石和單晶金剛石。
6. Rough rake face tools process soft materials. Suggestion: The machine tool conditions are poor to good, and the requirements are low to high. Please use high-speed steel, coated and polished cemented carbide, PCD polycrystalline diamond and single crystal diamond respectively.
7、速度低可用切削液避免，速度高用油霧潤滑，效果可改善。
7. Low speed can be avoided with cutting fluid, high speed can be lubricated with oil mist, and the effect can be improved.
加工鋁材時遇到的問題相關內容就講解到這里了，您對此有什么想咨的問題歡迎來我們網站http://m.igugo.cn咨詢了解！
So much for the problems encountered in aluminum processing. If you have any questions, please come to our website http://m.igugo.cn Ask about it!